Before
Faded paint, scuffed walls, yellowing trim, and colors that no longer match how the home is used.
Twelve coats of prep. Two of color.
Most painting failures are preparation failures. A brush and a bucket are the last two percent of the job. The other ninety-eight is surface repair, prime coats, blocking, sanding, and patience. Our painting crews approach the wall the way a finish carpenter approaches a piece of trim — they read the surface before they touch it.
We work with mineral paints and traditional limewash — materials that build texture rather than hiding it. Where standard latex will look flat in five years, a properly applied mineral coat develops depth. We do not offer color matching on budget paint systems.

Scuffed surfaces, faded colors, trim that reads yellow under daylight — Houston interiors age visually faster than the structure behind them.
The rooms that feel clean after a repaint are the ones where the surface was taken seriously first: patching, skim coating, priming, and millwork caulked before color goes on.
Faded paint, scuffed walls, yellowing trim, and colors that no longer match how the home is used.
A repaint that makes the home feel finished again — consistent sheen, sharp trim lines, and walls that hold their color through Houston summers.
Not every remodeler thinks this way. These are the commitments that separate a careful project from a forgettable one.
We do not spackle holes and call it a day. Any wall receiving a high-sheen finish is skim-coated — a full thin-set of joint compound, sanded to flat. The light at the end of the day will not lie.
We may use mineral paints, Roman clay, or traditional limewash — each applied according to its specification. Some of these products require three to five application days to cure between coats, and we plan the schedule accordingly.
Trim, casings, and cabinets are primed and painted before installation, then touched up in place. The result is a paint line that will not crack at the junction — a simple distinction that most painters ignore.
Inspect the surfaces, identify repairs, and plan protection for furniture and adjacent finishes.

Prepare the surfaces and apply the coating system selected for the material and its condition.
Review coverage, edges, and touch-ups after the finish has had time to dry.
Surface preparation, primer selection, sheen specification, and millwork sequencing determine how a paint job holds up — and how it reads under morning light a year later.
Walls receiving a high-sheen finish are skim-coated — a full thin layer of joint compound sanded flat. Spackle humps show up in any raking light.
Trim and casings are primed and painted before they go up, then touched up in place. The paint line will not crack at the junction.
Roman clay, mineral paint, and traditional limewash — each applied to its specification, with proper cure time between coats.
Understand the interior painting scope, the decisions needed before work begins, and how to review changes and completion.
Identify the walls, ceilings, and trim to be painted, and review colors in the light of the actual room.
Confirm which parts of the interior painting project are included in the estimate, along with materials, exclusions, and any decisions still needed.
Discuss access, protection, and the order of work. Agree on how unexpected conditions and proposed changes will be reviewed before additional work proceeds.
Review the agreed interior painting scope together, identify any remaining items, and discuss care instructions for the selected materials.


Interior work in Houston has to account for high humidity, busy family schedules, slab-on-grade conditions, and a wide mix of home ages from Heights bungalows to newer west-side construction.
Most of our interior work is in homes within twenty minutes of the 610 loop, though we travel for the right scope.
Honest answers to the questions that come up in every first conversation about this type of work.
We start by understanding the room, the frustrations, the desired finish level, and the constraints. From there, we can recommend the right scope rather than fitting a standard package onto a house that deserves better.
Tell Nova the project location, what you would like to change, and any known issues. For a repair, photos of the affected area and the surrounding space can help explain the work you are considering.